At No More Digging, we supply and install professional ground screw foundations from RADIX.
RADIX galvanises its ground screws to EN ISO 1461, providing a zinc coating that protects the steel of each ground screw against the elements. We can calculate the life expectancy of our ground screw foundations based on the average corrosion rates of their galvanised coating and steel specifications.
The average corrosion rate of the zinc coating on galvanised steel is 6µm per year in typical soil conditions, as provided and verified by independent engineers. With RDX PRO RF140 76MM Ground Screws* being galvanised to 85µm, we can show 85 / 6 = 14 years.
Once the zinc coating has been exhausted, steel corrosion can commence at an average rate of 30µm per year.
Based on our RDX PRO RF140 76mm ground screws* having a 3.0mm thick wall and helix, this would take 60.6 years to reduce to a 1.0mm thickness.
That is not the end of a ground screw, however. Checked with 50% of the 70kN test load to represent the Factor of Safety of two that RADIX adopts, as illustrated below, a reduction to 1.0mm is still within the parameters of a safe working load for ground screws.
Full 70kN loading on 15mmx3mm helix
FoS2: 35kN loading on 15mmx1mm reduced helix
Therefore, as evidenced above, the overall life expectancy of our ground screws is over 76.6 years.
* Life expectancy is calculated based on the RDX PRO RF140 M16 76×1550-T3.6 ground screw installed in typical soil conditions, with structural analysis documentation provided and verified by independent engineers.
If you would like some free advice for a project you’d like to get off the ground, get in touch, and we’ll be glad to help.
Download our brochure
Learn more about our ground screw foundations and their many time-saving and environmentally-friendly benefits.